Home / Cases / Grain Storage Tips
grain1509

Grain Storage Tips

Following basic principles of grain management will be important this year, as the high variability in quality will not leave much room for error.

Here are some good management tips:

1. Immediate cooling after harvest (and drying) – shelf life begins right away.

2. Have adequate aeration (0.1 cfm/bu or more) – all bins with all grains should be aerated.

3. Run a cooling cycle every 10-15 degree average change in outside temperature, starting at harvest. With 0.1 cfm/bu, a cooling cycle will take about 150 hours; proportionately less for higher airflows.

4. Get grain below 40F as quickly as possible.

5. Take out the center core of fines. Variable quality and lower test weight will mean more fines.

6. Inspect grain and monitor temperature weekly until December; every two weeks thereafter. Automated temperature cable systems are very useful; the larger the bin the less likely a manual check will be adequate.

7. Responding to temperature change is as important as the actual temperature. A 3 to 5 degree change between readings, even if from 40 to 45 F, is indicative of spoilage if the fan had not been run in the interim.

8. Stay within temperature-moisture guidelines.

(Source – http://www.agweb.com/article/8_grain_storage_tips_for_your_2013_crops/)

Grain Storage Tips обновлено: September 16, 2014 автором: admin

Leave a Reply

Your email address will not be published. Required fields are marked *

*